Malibu Boats RESPONSE TXi 2021, Руководство пользователя

Страница: 156 / 202

134 Care & Maintenance | 2021 OWNER’S MANUAL
Ongoing Care
General Cleaning
Malibu recommends always keeping the boat clean.
Immediately after an outing, the boat’s exterior and interior
should get a thorough rinsing with clear, fresh water, and then
should be allowed to air dry prior to covering with canvas. If this
is not possible, the boat’s cover should be removed as soon as
you arrive at your destination and allowed to dry.
If the boat will be left in water, the exposed areas should be
wiped down with clear, fresh water and allowed to dry before
boat covers are installed.
Canvas
Breathability of Fabrics – Air Permeability
Air permeability is an important factor in the performance
of outerwear where the wind resistance helps keep the user
warm. Fabrics that have high air permeability usually have
low water repellency, the latter being an important feature
for mooring covers. When in a slip, mooring, or parked on a
trailer, the cover is not experiencing any pressure that would
force air through the fabric so breathing or air permeating will
not occur.
In all cases, vents that are often placed on covers provide
more ability for air to move out from under the cover than the
fabric’s ability to breathe. It is important to note that in this
“static” condition air under the cover is stagnant.
Where air permeability is most important is when towing.
This is a dynamic condition and high air permeability will cause
the cover to billow and buffet, lowering its life, and potentially
causing damage to the surfaces it touches.
Mold & Mildew Cause and Prevention
Mold and mildew spores are ever present in air and soil, and
most will germinate when exposed to temperatures above 75°
F and relative humidity of 50%, with rapid spread occurring
at 80%; however, some can grow in significantly lower
temperatures and RH levels.
All fabrics will support growth but natural fibers like cotton,
due to their cellulose component, are more susceptible than
synthetics. Some synthetics are treated with an anti-microbial
agent which adds to their growth resistance. Anti-microbial
treatments protect the base surface itself, so that alone won’t
support spore growth. However, organic soiling on top of
those surfaces will. Once a population is established on the
cover, vinyl seating or gel coat, an irregular stain will appear
which ranges in color from gray to black; however, yellow,
orange, and red stains are possible. Sometimes UV exposure
can fade them but most often they remain permanent stains.
Treatment
(Canvas manufacturers acknowledge this is difficult and
very time-consuming, with limited expectations of success.
Therefore, it is desirable to avoid the necessity of mold and
mildew treatment.)
If growth is established, vacuuming with a HEPA filter unit
would be the first step followed by cleaning.
For fabric and vinyl surfaces, shampoo lightly with an
upholstery shampoo.
Focus on Prevention
The key in eliminating mold growth is controlling moisture.
Remove it as a factor and growth simply will not occur, so
maintaining a cool and dry condition with clean surfaces
NOTICE
Boats must be thoroughly rinsed inside and out with clear, fresh
water following all outings and then allowed to completely dry prior
to storage or parking. Failure to do so could result in damage to the
finishes and the development of mold or mildew, or permanent stains.
Such damage is not covered under warranty.
NOTICE
Consumers should never add aftermarket waterproofing to canvas.
The canvas must “breathe” in order to avoid mold and mildew. If any
spray-on waterproofing has been added after delivery, it will void the
warranty.