Malibu Boats RESPONSE TXi 2021, Руководство пользователя

Страница: 97 / 202

2021 OWNER’S MANUAL | Engines & Drive Trains 83
boat; however, if this occurs, the replacement engine’s serial
number must be reported to Malibu’s Warranty Department,
even if the warranty statement effective dates have expired.
In the event of a safety matter or recall, serial numbers often
alert the factory to which boats may be affected and allow the
company to contact consumers.
Engine serial numbers that do not match factory records may
lead to questions of legality also.
Engine Coolant
All Malibu Monsoon engines feature a hybrid of raw water
cooling and closed cooling. The closed cooling must have a
50/50 mix of marine grade, propylene glycol coolant (such
as Sierra brand) and clean, distilled water. From an empty
tank to the proper amount of coolant/water mix will require
approximately 4 gallons. Directions for maintaining proper levels
are provided in the Care and Maintenance section of this manual.
Maintaining proper levels is required to keep the warranty in
effect, and the instructions should continue to be followed for
the life of the boat/engine. Boat owners should also carefully
follow the raw water cleaning information provided in the
Care and Maintenance section of this manual, especially when
operating in salt water or brackish water conditions. Failure to
do so will void the warranty. Also see the saltwater information
provided in the Care and Maintenance section of this manual.
Engine Oil
In M-Series engines, use only
5w30 full synthetic dexosTM
Gen2 Engine oil. Malibu-Axis
strongly encourages the use of
Malibu-branded oil as it will meet or
exceed all requirements to maintain
a long life for the engine in excess
of warranty mandates. In LT4 engines, use only 0w40 full
synthetic dexosTM Gen2 Engine oil.
The engine requires nine quarts to fill from empty. (Never
overfill the engine oil, nor run the engine without sufficient
oil as indicated on the oil dipstick.) The use of any other oil
or fluid may void the warranty. Instructions for proper levels,
maintenance, and oil changes are provided in the Care and
Maintenance section of this manual.
Transmission Fluid
Your boat arrives from the factory with Castrol DEX/MERC ATF
in M-Series engines. We recommend the use of this fluid. LT4
Engines come filled with Castrol Transmax Type F transmission
Engine Descriptor M5Di M6Di LT4
Type/Aspiration 4 Cycle – Naturally Aspirated 4 Cycle – Naturally Aspirated 4 Cycle – Super Charged
Engine Configuration 90-degree V8 90-degree V8 90-degree V8
Displacement (cc) 5,300cc (327 CID) 6,200cc (383 CID) 6,162cc (376 CID)
Borespacing (mm) 111.76 111.76 111.76
Bore x Stroke (mm) 96.01 X 92 103.25 X 92 103.25 X 92
Compression Ratio 11:1 11:1 10:1
Fuel Compatibility Gasoline Gasoline Gasoline ( Premium Only)
Engine Rotation (Front) CW CW CW
Block / Head Material Cast Aluminum Cast Aluminum Cast Aluminum
Block Structure Deep Skirt Deep Skirt Deep Skirt
Main Bearing Caps 6 Bolt 6 Bolt 6 Bolt
Vavle Train Configuration OHV-CIB OHV-CIB OHV-CIB
Valves per Cylinder 2V 2V 2V
Valve Lifter / Lash Adjuster Roller Hydraulic Roller Hydraulic Roller Hydraulic
CAM Drive 3/8” Roller Chain 3/8” Roller Chain 3/8” Roller Chain
Firing Order 1-8-7-2-6-5-4-3 1-8-7-2-6-5-4-3 1-8-7-2-6-5-4-3
Engine Specifications