Malibu Boats RESPONSE TXi 2021, Руководство пользователя

Страница: 161 / 202

2021 OWNER’S MANUAL | Care & Maintenance 139
The following areas, where equipped, should always receive
special attention when cleaning after boating in salt/brackish/
polluted water:
1 = Ladder 5= Front cup holders
2= Ladder door hinges 6= Armrests
3= Ladder door handle 7= Vent covers
4= Bow grab handles
1= Windshield bracket 6= Throttle
2= 12” display screen mounts 7= Grab handle (if equipped)
3= Phone holder/Sport dash 8= Subwoofer plate
4= Power outlet mount 9= Seat mount
5= Power switch mount
1= Cup holders 4= Center plate
2= Grab handles 5= Tower release hinges (varies by tower)
3= Trash lid 6= Rear sliding seat mounts and arms
Malibu has determined that the use of Corrosion Block is
necessary to ensure long life for metal components. The use
of Corrosion Block, available at www.corrosionblock.com, as
directed on the bottle or can is required to keep the warranty
in force. (While Corrosion Block is the recommended product,
WD-40 Long-Term Corrosion Inhibitor may be used. Regular
WD-40 cannot be used as it does not contain all the protective
ingredients of the Long-Term Corrosion Inhibitor.)
Avoid getting Corrosion Block on other, non-metal
surfaces, particularly vinyl seats or soft-grip flooring. If
this occurs, clean immediately as directed by the product’s
directions to avoid stains that are also not covered under
warranty.
To properly protect
and ensure long
life for vulnerable
components, following
the operation in salt or
brackish water, provide
extra attention to the
cleaning process.
Begin by gathering
the following supplies:
• WD-40 Long-Term Corrosion Inhibitor or Corrosion
Block
• Microfiber towels
Boats operated in salt water, brackish water, or polluted fresh water
must be thoroughly rinsed with clean, fresh water after each outing.
The corrosive properties of these types of water will cause damage
that is not covered under warranty. Hardware—even hardware chose
for its anticorrosive properties—that is damaged by salt/brackish/
polluted water may eventually fail, which could result in serious injury
or death to persons onboard.
! WARNING
NOTICE
The sacrificial zinc anodes do not entirely eliminate the corrosion
process from the rest of the boat and its components. It is critical for
the boat to be rinsed and flushed after each use. Failure to do so will
void the warranty.
NOTICE
Failure to use Corrosion Block as directed on the product label will
result in the nullification of the Malibu warranty in instances of
corrosion damage. Failure to clean Corrosion Block off non-metal
surfaces can result in damage that is not covered under warranty.
NOTICE
Malibu uses only marine-rated and marine-grade fasteners on all
models. If, at any time, it is necessary to replace any fasteners,
seek guidance from an authorized Malibu dealer to ensure that
such replacements meet the requirements for operation in a marine
environment.
6
5
4
3
2
1
7
1
2
3
4
5
6
8
7
1
2
3
4
5
6