Malibu Boats 2009 21 vRide, Руководство пользователя

Страница: 75 / 132

2-45
Stereo Controls
POWER ON/OFF Button (1)
Push the PWR button (1) to turn on the unit. Push it again to turn off the unit.
SEL and VOL Button (2)
1. Audio control (VOLUME/BASS/TREBLE/BALANCE/FADER)
By quickly pressing the SEL (2) button, you can select which of the below features
to set:
- VOL display - volume control > press button (2)>
- BAS display - bass tone control > press button (2)>
- TRB display - treble tone control > press button (2)>
- BAL display - balance control > press button (2)>
- FAD display - fader control > press button (2)>
Use the VOL up/down button (16) to adjust. In each mode, the waiting time for
adjustment is about 5 seconds. If the waiting time is over, the unit returns to the last
displayed mode of Radio, USB/NAND (internal memory), CDC, iPod, SIRIUS or
CD mode. These settings are indicated on the display window.
Figure 2-39. Stereo Functions
2. Beep 2nd, I-Vol, Area and DSP Selection
When the SEL button (2) is held over 2 seconds, the unit will be operated as below:
Figure 2-40. Stereo Functions
a. Beep 2nd
In the Beep 2nd mode, you can control Beep on or Beep 2nd by pressing VOL
up/down.
- Beep on: You can hear “beep” sound when you press any button.
- Beep 2nd: You can hear “beep” sound when you press any button over 1.5
seconds.
b. I-Vol
By pressing the SEL (2) button again, the unit will turn to I-VOL mode (Initial
Volume Level Adjustment). You can adjust the I-Vol to the level you want by
using VOL up/down button. After setting the initial level, the volume will
default to this level every time the unit is powered on.
c. Area Selection
By pressing SEL (2) button again, the unit will be in Area selection mode. Then
use VOL up/down button to choose USA or EUR. Press and hold BD/FN for 2
seconds to confirm and save selection.
Beep 2nd
I-Vol Area
Press Press Press
SUB-W
Press
DSP
VOLUME
Select
BASS
Select
TREBLE
Select
FADER
Select
BALANCE
Select
Chapter 2_09.qxd: Chapter 2 doc.qxd 10/7/08 3:11 PM Page 45