HeightOffset:
If the operator has entered an offset,
the value is documented in this field. This offset will
have a direct effect on the Href value.
HeightrefFile:
Height reference file. Shows the
name of the file used as active height reference
when point was logged
POI:
This is set if the operator has marked a point
as a
P
oint
O
f
I
nterest. Value can be 0 (no) or 1
(yes)
HeightrefName:
Height reference name. Shows
the name of the specific reference inside the
reference file, used as active height reference
when point was logged
ToolPoint:
Shows which toolpoint was used to log
the point. Only relevant for Excavators that can
switch and log with Left, Center and Right toolpoint
on the bucket
Height:
Shows the vertical distance from toolpoint
to height reference when point was logged
Comment:
If the operator has written a comment
for the point, it will be shown here
Makin' 3D User guide 2.18, 1st edition, May 2022 © Copyright 2021, Makin AS
55
