Log line
Log line is an as-built functionality used to document how points are connected to each other. Log line can
be used to document line breaks where there are changes in slope or direction, or if the project requires it,
to document every line junction.
To start a new line you must log the starting point of the line or select an existing point in the project. When
a point is selected, you press the log line icon in the reference menu, to enable the log line mode.
Move the toolpoint to the next point in your line and press the log line button in the runscreen to log this
point.
To stop this line, press the Cancel log line button in the top of the runscreen.
Makin' 3D User guide 2.18, 1st edition, May 2022 © Copyright 2021, Makin AS
50
