Show maps
Menu > Display > Show maps
The user can hide or show maps together with the project to get a better overview. The map will be
shown below the lowest active 3D reference in the project.
The tool cuts are shown on the map in Top View. Otherwise, tool cuts are only shown on elements
of the 3D model marked as a height reference.
Note: In the 3D View, the map will be seen in a perspective view. If you want to see it straight from
above, use the Top View instead.
●
Tap to select/deselect visibility of map
Show other systems
Menu > Display > Show other systems
Other systems currently working on the same project - like machines, rovers, etc. - will show up.
Makin' 3D User guide 2.18, 1st edition, May 2022 © Copyright 2021, Makin AS
40
