2
Kleiss MCS7-2PVC System Manual
|
www.MainlineControlSystems.com
1.0 General Safety Information:
NOTE:
Before using the Kleiss MCS7-2PVC System make certain you read the instruction manual completely and are
comfortable and familiar with the operation of the tools. If you have any questions, concerns or feel there is conflicting
information, please contact Mainline Control Systems (MCS) before proceeding at 844-FLO-STOP.
NOTE:
The purpose of the Kleiss MCS7-2PVC System is to tap and stop flow in 2” natural gas lines operating at a
maximum of 7.5 psi. Review and follow your company safety procedures for operations involving tapping and stopping
live natural gas lines.
NOTE:
When operating the Kleiss MCS7-2PVC System on non-metallic lines, please follow company procedures for
grounding equipment for discharge of any static electricity.
2.0 System Specifications:
2.1 General
2.1 General
A)
Pipe diameter = 2” (2.375” OD)
B) Pipe material = PVC
C) Maximum operating pressure = 7.5 psi
2.2 Kit Specifications
2.2 Kit Specifications
A)
Storage case
a) Shipping weight = 65 lbs.
b) Dimensions = 57” length x 17” width x 7” height
B) Tapping tool
a) 1.161” PVC cutter [Part #13100030]
b) 0.25” PVC pilot drill [Part #15001055]
c) Tapping tool weight with cutter = 8 lbs.
d) Tapping tool height with cutter = 18”
C) Completion tool
a) Completion tool weight without completion plug attached = 5 lbs.
b) Completion tool height = 12”
D) Stopping tool
a) Stopping tool weight = 8 lbs.
b) Slide gate valve weight = 7 lbs.
c) Stopping tool height with gauge rod completely extended = 3 feet, 7 inches
d) Stopping tool height with stopper set = 2 feet, 7 inches
e)
By-pass / vent port
