42
UK | Mounting
PushPull combination system with PP 45 EO
i
PP 45 EO extension module can only
be combined with PP 45 RC/PPB 30
RC units. Wired operation is needed for
other unit types.
1.
Install the EnOcean extension modu
-
le. For more information
Accessory
instructions. If necessary, plan a separate
distribution box for the wiring.
2.
Connect EnOcean extension module to
RLS 45 K control (RS 485)
Connection
diagrams in the appendix.
3. Start up ventilation system, activate
EnOcean in service mode
Chapter 8.
PP 45 Act EnOcean actuator
With the PP 45 Act, radio-controlled PP 45 RC/
PPB 30 RC units can be combined with wired
exhaust air units (ECA, ER). Installation similar
to light switch installation; can be switched on
and off at the touch of a button. For further
information
Mounting and operating instruc-
tions for PP 45 ACT.
9.9 Installing PP 45 HYI humidity sensor
in
RLS 45 O or RLS 45 K
1. Install room air control as described in
Chapter 9.7.
NOTICE
Unit damage/no function if the humidity
sensor is installed incorrectly.
Do not bend
pins. Insert sensor up to stop in bush.
2. Insert PP 45 HY humidity sensor at I2C
interface
Arrow.
3. Fit frame so that it engages.
i
Ensure that sensor opening (hole in
frame) is above the PP 45 HYI sensor.
4. Start up ventilation system and register
humidity sensor in service mode
Chapter 10.
5.
For installation and wiring of an external
sensor
Commissioning instructions.
