44
UK | Commissioning
10.2 Service menu for RLS 45 O
bold = factory setting
LEDs
Parameter
Set value /
ventilation level
Setting /
description
Device type
on RLS
(Fan1/Fan2)
1
2
PP 45
PPB 30 O
The type family, which is connected
to the Fan1/Fan2 fan interface, is
selected here.
Notice: Only single-type PP 45
or
PPB 30 unit combinations are per-
mitted at the fan interface!
Number of device
pairs/
devices on RLS
(Fan1/Fan2)
1
2
3
4
5
1 device pair
PP 45 or 1 PPB 30
2 device pairs PP 45 or 2 PPB 30
3 device pairs PP 45 or 3 PPB 30
Odd number, 3 devices PP 45
Odd number, 5 devices PP 45
The number of units connected to the
fan interface (Fan1/Fan2) is selected
here.
Ventilation levels
1
2
Ventilation level "0" possible
Ventilation level "0" blocked
With the ventilation level "0" blocked
setting, the ventilation units cannot
be switched off on this control. The
units then run with at least ventilation
level 1.
Power units
(LT) or
room air
controls
(RLS)
0
1
2
3
4
5
6
Operation without further LT/RLS
Operation with 1 LT or RLS
Operation with 2 LT or RLS
Operation with 3 LT or RLS
Slave no. 1
Slave no. 2
Slave no. 3
Adjuster for adding further room air
controls (RLS) or power units (LTs) to
this room air control.
Example:
Two
further RLS (RLS #2 and #3)
are connected to RLS #1.
Set
value = 2.
Set set value 4 on RLS #2
and set value 5 on RLS #3.
Notice: Only single-type RLS com-
binations are permitted!
LED flashing modes: LED flashing rapidly LED flashing slowly