46
UK | Commissioning
10.3 Service menu for RLS 45 K
bold = factory setting
LEDs
Parameter
Set value /
ventilation level
Setting /
description
Device type
on RLS
(Fan1/Fan2)
1
2
PP 45
PPB 30 O
The type family, which is connected
to the Fan1/Fan2 fan interface, is
selected here.
Notice: Only single-type PP 45
or
PPB 30 unit combinations are per-
mitted at the fan interface!
Number of device
pairs/
devices on RLS
(Fan1/Fan2)
1
2
3
4
5
1 device pair
PP 45 or 1 PPB 30
2 device pairs PP 45 or 2 PPB 30
3 device pairs PP 45 or 3 PPB 30
Odd number, 3 devices PP 45
Odd number, 5 devices PP 45
The number of units connected to the
fan interface (Fan1/Fan2) is selected
here.
Notice: Release/number of PPB 30 K
units is taken into account in another
sub-menu (PPB 30 K parameters).
Ventilation levels
1
2
Ventilation level "0" possible
Ventilation level "0" blocked
With the ventilation level "0" blocked
setting, the ventilation units cannot
be switched off on this control. The
units then run with at least ventilation
level 1.
LED flashing modes: LED flashing rapidly LED flashing slowly