MAGUIRE Gravimetric Gateway LineMaster, Установка, эксплуатация и обслуживание

Страница: 75 / 93

Maguire Products, Inc.
75
LineMaster

Parameter List
Navigating Parameters
The First press of the PARA key will enter the GENERAL list at the top. Press the PARA key to move down in the list.
To change a displayed parameter enter a new number in place of the old one. CE will cancel a number entry before
the last digit is entered. The purpose of each parameter is explained on the following pages.
EXIT will exit the sequence at any time.
Navigating Parameters Quickly - Keypad Sequence:
Press To ENTER the list at the TOP LEFT (FLG)
Press
To move DOWN a list
Press To move UP
Press When finished EXIT will take you out of Parameters
FLG Currently unavailable. For Future use.
FUL Change only for extremely fluffy or heavy material
FUL is the full batch weight in GRAMS set at the factory by model number. This parameter
should not be altered.
PRT Automatically print out of current LIW summary
When enabled a summary will be printed (appended) to the printer.txt file located on the
flash drive. To enable enter a value in minutes (example: 00001 = 1 minute). The
summary data included: current date and time, last printed summary, last date/time
summary was cleared, LIW ID number, mode, current weight, current status, alarms,
current voltage, target throughput, actual throughput, cycles (refills), grand total.
DATE TIME
CURRENT 11/14/18 04:53:14
LAST PRINTED 11/14/18 04:52:43
LAST CLEARED 00/00/00 00:00:00
LIW ID# 3 MODE: Extrusion
CURRENT WEIGHT: 0 g (000000)
STATUS: UNLOCKED (FILLING)
ALARM CODE: 28 - NOT FILLING
VOLTAGES: XCV=00.00V
TARGET WT/HR 5552.9 ACTUAL WT/HR 5575.4
CYCLES 4
TOTAL 345.1
AMOUNTS ARE IN POUNDS
A new summary print is triggered by either time (minutes in PRT parameter) or a change to
LIW status, change to target throughput or an alarm. A maguire folder must be present on
a flash drive plugged into the controller.