MAGUIRE Gravimetric Gateway LineMaster, Установка, эксплуатация и обслуживание

Страница: 66 / 93

Maguire Products, Inc.
66
LineMaster

LIW Controller Keypad – Description of Functions
There are two operation Modes are available:
NORMAL and PROGRAM .
NORMAL operating mode - When power is turned on, the unit is in this
mode. Only the VIEW, CE, EXIT keys are available in this mode. The
keypad, arrow keys and lock key are available when running in Normal
mode and in “Lock”.
PROGRAM mode allows access to star functions, parameters and
additional configuration and diagnostics and calibration functions. To
enter program mode, you must press * then enter the program mode
password.
VIEW DATA Press to display the CURRENT Date and Time, LAST CLEARED date and time,
and stored Grand Totals. Total
Cycles and weight Total (in Pounds, Kilos) are
available.
Number of CYCLES that have occurred: (Cycles: xxxxx)
Total accumulated weight: (Total: xxxx.x )
Each successive press of the VIEW key displays the next item. The last
displayed line will say (00=CLEAR) for 5 seconds. During this time, you may
press 0,0 to clear the data. Waiting 5 seconds or pressing any other key will exit
the sequence. When the sequence is exited, normal automatic operation
resumes. These totals may be displayed as pounds or kilograms by a selection
procedure explained later (*89).
Press the VIEW key once followed by the "*" key to cause all information to be
sent to the printer (if available). To then clear the data, press 00 within 5
seconds. Press any other key or, wait 5 seconds, to continue the process
without clearing the totals.
EXIT
This key is operational in ALL MODES.
Use the EXIT key to exit any and all keypad sequences.
CE
Press "CE" at any time to display raw data readout of the load cells for five
seconds. This is helpful in diagnosing possible load cell problems and is
explained in detail in the MAINTENANCE section.
"CE" is used frequently in connection with other keys, to clear or scan through
selections.