MAGUIRE Gravimetric Gateway LineMaster, Установка, эксплуатация и обслуживание

Страница: 83 / 93

Maguire Products, Inc.
83
LineMaster

Updating Controller Firmware
USB Drive Update
1. Updating firmware uses a standard USB drive. There are 3 files that are required to perform a
software update to the LIW Controller. These files may be requested from Maguire Products and are
labeled:
UPDATER.BIN
912WFxxx.crc
912WFxxx.s28
When you are provided with these three files, they should be copied to a USB drive and placed in a
folder named:
Maguire
2. Insert the USB drive into the USB port on the LIW controller. Note, the controller should be powered
on but should not be running cycles.
3. Enter into program mode. Press 22222
4. Press 93. The display should say Checking Device…
5. If more than one firmware version is stored on the flash drive, Press to toggle between firmware
versions. If you only have a single copy of firmware stored on the flash drive the controller will default
to displaying that version.
Select Version:
WFxxxxx
6. When the firmware to loaded is displayed, press the CE key to begin the firmware transfer.
Verifying: [WFxxxxx]
▒ ▒ ▒ ▒ ▒ ▒ ▒ ▒
Updating: xxx/726
▒ ▒ ▒ ▒ ▒ ▒ ▒ ▒
Do not turn off controller or remove the flash drive while firmware
is updating! Doing so may corrupt the controller’s firmware.
7. When Update Complete! is displayed, turn off the controller and turn on again. Clear All will display
if a version update was applied. The firmware update to the controller is complete.
Firmware Naming Scheme
9 1 2
D D
1 0 0
A
4
Processor Code
Motorola 9S12
256K
Microprocessor
Controller
D
L
O
W
Dryer
LIW
DPot
WSB
Year
D: 2004
C: 2003
B: 2002
A: 2001
Month
Jan: 01
Feb: 02
...
Dec: 12
Day Version