Maguire Products ULTRA-1000, Установка, эксплуатация, техническое обслуживание

Страница: 82 / 92

Maguire Products, Inc.
Rev. December 18, 2019
– ULTRA-1000 Touchscreen
82
ULTRA By Maguire

- Ultra Low Energy Dryer
CONTROLLER
- Microprocessor based control (Motorola 6812)
- 4 x 20 character Blue back lit display
-
4 Digit 1” high Red LED for display of Actual or Set Temperature
- Icon representation of function
- Flash Memory, SD card with micro capability
- Ethernet & USB ports
- Optional CANbus communications for remote / repeater control
- Anodized bezel
ELECTRICS
- Main Disconnect, 100 Amp, 70 AmpClass J fuses
- Altec Euro style disconnects
- Step down transformer with regulated DC power supply
- 70 cfm cooling fan, bottom vented
- 10 HP Centrifugal blower, 600 scfm w/ VFD
- RTD Inputs, 4: Heating hopper inlet, Heating hopper exit, Dry Purge inlet - Vacuum Vessel,
Material exit - Retention Hopper
DRY AIR PURGE CIRCUIT
- Air filter regulator
- Coalescing Filter, 1/10
th
micron for removal of oil and fine particulates
- Exhaust Shut-off
- Compressed Air Dryer, 500 liter/min.
- 3,000 kW heater dedicated for dry air purge
The majority of the dry air is directed to the retention hopper, the vacuum vessel
receives a constant low volume of -40 dew point dry air. At the end of the vacuum cycle
during atmospheric equalization a valve shifts to allow an inrush of dry air.
VACUUM CIRCUIT
- 8 Element, 3 Stage PIAB configuration for maximum effectiveness
- Expandable manifold to accept future add-ons
-
1” Electro-pneumatic check valve
- Balanced pressure regulator to insure the maximum efficient operational level
OTHER FEATURES
- Noise reduction assembly on blower inlet with filter
OPTIONS
- Magnehelic gauge on blower
- Power Analyzer