Maguire Products ULTRA-1000, Установка, эксплуатация, техническое обслуживание

Страница: 37 / 92

Maguire Products, Inc.
Rev. December 18, 2019
– ULTRA-1000 Touchscreen
37
ULTRA By Maguire

- Ultra Low Energy Dryer
Dry Purge Setup Purge Cham -
OFF/CYC/ON
– Controls when the vacuum chamber is
purged with membrane dried air.
OFF
–
No vacuum chamber purging occurs.
CYC - Vacuum chamber purging occurs during allotted
vacuum cycle time (VTs).
ON
–
Vacuum chamber purging occurs during allotted
vacuum cycle time (VTs) and extended vacuum if applicable.
Purge Interval - Interval in seconds between purges.
Purge Duration -
Duration in seconds that the purge will occur.
Preheat Setup Preheat Mode - Auto or time - Preheat time for the material in the
Material Hopper. Default preheat time is 30 minutes.
Preheat Time - The Preheat Time is the duration of preheat time.
Parameters
Parameters access. See page 40.
System Configuration
Print Options
Print Setup - See page 74
•
Print Parameters - Prints the parameter list to a USB.
•
Print Alarm History - Prints the Alarm History to USB.
•
Print Alarms and Event: Prints Alarm and Events to USB.
•
Print All - Prints parameters, events, and alarms to USB.
•
Copy Log File
–
Copies raw log file to USB.
System Preferences
Change Passwords - Sets the Setup Menu Password. Default
password is 22222. Setting the password to 00000 disables
password protection.
Date and Time - Set time, date and date format.
Display Options - Show / Hide Information and options on the
controller screens
•
Batch Mode - ON/OFF
– When ON, the option to dry a
batch of material is displayed on the home screen.
•
Cycle Info - ON/OFF
– Displays Cycle info on main screen.
•
Dispense Time - ON/OFF
– Displays the fill time on main
screen.