Maguire Products ULTRA-1000, Установка, эксплуатация, техническое обслуживание

Страница: 40 / 92

Maguire Products, Inc.
Rev. December 18, 2019
– ULTRA-1000 Touchscreen
40
ULTRA By Maguire

- Ultra Low Energy Dryer
Parameters
All Maguire ULTRA controllers operate according to certain internal PARAMETERS. Because customer
requirements vary widely, we have made parameters accessible for change through the keypad. In most cases,
these parameters will never need to be changed. Some parameters that are routinely adjusted values are
adjustable from the main display. To access and edit the parameters, see
Changing Parameters in this section:
Changing parameters can have an impact on the Dryers performance. It is highly
recommended that a supervisor change the default Program Mode password to protect the
values. Prior to making any changes, make sure you understand what you are doing. If in
doubt contact a Maguire Dryer Technician before making changes to your dryer.
Blower Parameters: Heater Parameters:
BDT Blower Delay Time PTS Preheat Temperature Setting
BLF VFD Low Limit PHT Preheat Time
BHF VFD High Limit PHD Preheat Differential
BDF VFD Frequency PTD Preheat Target Delta
BZL VFD Zero Level RTS Run Temperature Set-Point
BLA VFD Level Adjustment PT1 PD Loop Proportional
BHT VFD Heat Throttle DT1 PD Loop Derivative
BMW Blower Max Wattage UT1 PD Loop Update Time
Dispensing Parameters:
OT1 Heat1 Over-Target Alarm
VCH Vac. Chamber Hi Level NH1 Heat1 No Heat Alarm
VCL Vacuum Chamber Low Level SO1 Heat1 Set-Point Off. Percent
RHH Ret. Hopper Hi Level MP1 Heat1 Max Percent
RHL Retention Hopper Low Level RO1 Heat1 Restart Offset
BLK Bulk Density MAX Max Temp Set-Point
VFR Vacuum Chamber Fill Rate ESL Energy Savings Limit
VDR Vacuum Chamber Dump Rate ESD E.S. Differential
VFT Chamber Fill Time EST Energy Savings Time
VDT Chamber Dump Time ESP ES Proportioning
FLA Fill Lag Time RMP Temperature Ramp Settings
DLA Dump Lag Time CTM Cool-Down Temperature
VGD Vacuum Gate Delay CTR Cool-Down Timer
VFA Chamber Fill Adjust H1W Heater 1 Max Wattage
HDD Heating Hopper Dump Delay PGS Heat2 Temp Set-Point
VCT Vacuum Chamber Dump Threshold PT2 Heat2 Proportional
CDR Chamber Dump Reties DT2 Heat2 Derivative
RAL Residence Alarm UT2 Heat2 Update Time
BCH Batch Size OT2 Heat2 OverTarg Alarm
LTP Loader Trip Point NH2 Heat2 No Heat Alarm
LTC Loader Throughput Cutoff SO2 Heat2 Set-Point Off.
HHV Heating Hopper Volume FO2 Heat2 Fixed Output
HHU Heating Hopper High Level DPD Dry Purge Delay
HLA Heating Hopper Level Alarm PST Purge and Shutdown
L1T Loader 1 Timings H2W Heater 2 Max Wattage
L1A Loader 1 Alarm
Load Cell Parameters:
L2T Loader 2 Timings KDF Loadcell Stable Wt.
L2A Loader 2 Alarm LST Load Cell Stable Time
Vacuum Parameters:
LCZ Loadcell Zero
VTS Vacuum Time Setting WST Weight Settle Time
VPL Vacuum Pressure Low LZ1 Loadcell 1 Zero
VPD Vacuum Pressure Delta LZ2 Loadcell 2 Zero
VSO Vacuum Shutdown Offset
System Parameters:
LVT Low Vacuum Timeout ELT Event Logging Time
NVT No Vacuum Timeout EUS Energy Usage Setting
VPT Chamber Purge Timer
VPI Chamber Purge Interval
ATM Atmospheric Pressure