Maguire Products ULTRA-1000, Установка, эксплуатация, техническое обслуживание

Страница: 34 / 92

Maguire Products, Inc.
Rev. December 18, 2019
– ULTRA-1000 Touchscreen
34
ULTRA By Maguire

- Ultra Low Energy Dryer
Setup Menu
– Full Explanation
Setup is a password protected area for accessing Dryer or System specific
configuration settings. Setup is accessible from the main screen by pressing:
Press Display will prompt for a password. (default: 22222) Then press:
Parameters
–
All Dryers operate according to certain internal
PARAMETERS. Because customer requirements vary widely, we have
made a wide range of parameters accessible for change through the
touchscreen. Parameters are grouped into the following categories: Blower,
Heater, System, Dispensing, Load-Cell, and Vacuum. Parameters are
covered on page 40.
Setup is divided into two categories: Dryer Configuration and System Configuration.
Dryer Configuration includes device specific settings such as: Alarm Setup, Auto-Stop
Setup, Dry Purge Setup, Preheat Setup, Auto-Start Setup, Convey Setup, Load-Cell
Setup, and Parameters.
System Configuration includes system wide general settings such as: print options,
diagnostics, resets, system preferences, and communications settings.
The following section describes the features within the Setup Menu.
Dryer Configuration
Setup Menu Option Description / Options
Alarm Setup Material Shortage Alarm
OFF: Disables the Material Shortage alarm
WARN: In the event of a material shortage, activate
the audible alarm and strobe light but
continue retrying for material.
SHUTDOWN: In the event of a material shortage, activate
the audible alarm and strobe light and
automatically initiate a planned shutdown.
Audible alarm with sound for 15 seconds and
the strobe will flash until the dryer is
completely shut down.
When Material Shortage Alarm is in Warn or Shutdown Mode
Fill Retries are ENABLED. When set to OFF, Fill Retries are
disabled.