3 - Connection Types
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Programmer’s Manual (COMMANDS)
Page 32 of 247 (
D998200136-31
)
3.3
How to Use Network Connections (Ethernet Only | 802.11 Wireless
Only)
When the device is connected to the host via a 10/100 Ethernet port or 802.11 wireless, on power-up the
device attempts to contact a DHCP server to acquire a dynamic IP address. If the device is configured to
use a static IP address, it uses its preconfigured IP address instead.
The default port for the host to communicate with the device is TCP/IP
port 26
.
On some devices, network functionality and the following network-related keypad commands are only
enabled when the device’s USB cable is not connected.
To show the
MAC address
of the device, press keypad buttons
Left function key
6
2
2
Right
function key
.
To show the current
IP address
of the device, press keypad buttons
Left function key
,
4
7
2
Right
function key
.
