Appendix H - EMV Settings (EMV Only)
DynaPro Go| Handheld PIN Pad Device with MSR/Contact/Contactless | Programmer’s Manual (COMMANDS)
Page 214 of 247 (
D998200136-31
)
PW Reader Risk
Parameter
DFDF1F
MagTek
Byte 1:
Default 0x7B
Bit 0 Status Check in default Reader Limit
Set
0 = Disabled
1 = Enabled
Bit 1 Amount Authorized Zero Check in
default Reader Limit Set
0 = Disabled
1 = Enabled
Bit 2 Amount Authorized Zero Check
Option in default Reader Limit Set
0 = Option 1
1 = Option 2
Bit 3 Reader Contactless Transaction Limit
Check in default Reader Limit Set
0 = Disabled
1 = Enabled
Bit 4 Reader CVM Required Limit Check in
default Reader Limit Set
0 = Disabled
1 = Enabled
Bit 5 Reader Contactless Floor Limit Check
in default Reader Limit Set
0 = Disabled
1 = Enabled
Bit 6 Dynamic Reader Limit (DRL) check is
supported
0 = Disabled
1 = Enabled
Bit 7 – Reserved
Byte 2:
Default 0xC0
Bits 0..5 Reserved
Bit 6 Cash Back Transaction support
0 = Disabled
1 = Enabled
Bit 7 Manual Cash Transaction support
0 = Disabled
1 = Enabled