Magni RTH 4.18, Руководство по эксплуатации и обслуживанию, Страница: 75 / 127

OPERATION 75
INFORMATION REGARDING
TRANSPORT
Shipping the vehicle
Make sure the total weight of the vehicle and
transport vehicle comply with the standards and
regulations in force in the countries along the route.
Ensure that the road chosen has vertical and
horizontal margins suitable for the transport vehicle
with the vehicle loaded on it.
Before loading the vehicle, remove all slippery
material from the transport vehicle, railway carriage
or loading ramp.
Before loading the vehicle, always block the wheels of
the transport vehicle or railway carriage with wedges.
The boom must be completely retracted and lowered,
until the quick-fit coupling or equipment come to rest
on the transport vehicle.
The dimensions and weights for shipping a standard
vehicle are shown in this Use and Maintenance Manual
in the technical specifications.
Travelling by road with the vehicle
The vehicle must conform to the road travel codes of
the country in which it is to be used.
Consult your dealer for additional information on the
matter.
Observe the general rules on the matter of road travel
in force in the country in which the vehicle is to be
used.
While travelling on roads, only use the mode with two
steering wheels.
Travel with the telescopic boom completely retracted
and lowered as far as possible.
Make sure that the quick-fit coupling is high enough
from the ground.
During road circulation it is mandatory to enter the
mechanical lock of the turret rotation.
The circulation on the road with accessory mounted
in the head of the boom is allowed only if expressly
indicated in the technical attachment of the road
approval.
Lifting and anchoring the vehicle
If the vehicle slips during transport, it can cause injury
or even death.
The vehicle may slip if inadequate procedures or
equipment are used for transport. Use suitable
procedures and equipment for transport.
Lifting
Use equipment approved for the weight of the vehicle
to be lifted together with the equipment.
The configuration of the lifting devices must be such
as to avoid damage to the vehicle.