Magni RTH 4.18, Руководство по эксплуатации и обслуживанию

Страница: 57 / 127

OPERATION 57
- Y1 : move the joystick forward to lower the
stabilisers;
- Y2 : move the joystick backward to raise the
stabilisers.
After stabilising the vehicle, always check the
levelling by means of electronic level
4 . The indicator
must be in the centre of the measuring range.
The vehicle can be automatically levelled on
stabilisers. For automatic levelling of the vehicle on
stabilisers, press button
5 .
Activation of the emergency hydraulic
circuit
If there is a fault in the I.C engine, hydraulic power can
be obtained from an auxiliary motor pump.
The auxiliary pump makes it possible to perform
emergency hydraulic movements, to bring the
suspended equipment back to the ground or ensure
safety of the operators present on the lifting platform.
To activate the emergency hydraulic circuit press the
switch present on the control panel to the right of the
driver’s seat.
The operativity of the emergency hydraulic circuit has
a
maximum duration of 30 seconds .
Do not use the emergency pump unless there is a
malfunctioning of the hydraulic system.
Unnecessary prolonged use of the emergency electric
pump will cause the level of the battery charge of the
forklift truck to be used up rapidly.
Exclusion of the safety systems
Exclusion of the safety systems accompanied by
inappropriate movements can cause the vehicle to
tilt over, with risk of accidents and death.
Do not try to exclude the safety systems to increase
the loading capacity of the vehicle.
Take the key with the metal grip from the safety keys
cabinet after breaking the glass using the hammer
provided.
Insert the key in 1. Pressing the key and turning it
clockwise while holding it in position will automatically
activate the acoustic alarm and steady red warning light
on the top of the cab to warn of the potentially
hazardous situation for those working in the area near
the forklift truck.
Perform all the necessary movements to solve the
emergency and restore the vehicle to safety
conditions.
Remove the key and put it back in its container.
Replace the glass that was broken earlier.
Exclusion of safety systems for the lifting
platform
Take the key with the plastic grip from the safety keys
cabinet after breaking the glass using the hammer
provided.
Insert the key in 2 . Press and turn the key clockwise,
holding it in position. Use the same hand to press and
hold down button
3 .
Perform all the necessary movements to solve the
emergency and restore the vehicle to safety
conditions.
Remove the key and put it back in its container.
Replace the glass that was broken earlier.
1
2
3