Magni RTH 4.18, Руководство по эксплуатации и обслуживанию, Страница: 56 / 127

56 OPERATION
Control of the stabilisers
The stabilisers can be controlled in two ways:
- by means of switches;
- by means of multi-function display.
The switches for control of the stabilisers are present
in the dashboard to the right of the driver’s seat.
The switches are used to control the movements of
the four stabilisers simultaneously.
For individual control of the stabilisers, act in the
multiple function display page.
Control by means of switches
Switch 1 controls the stabilisers extension and
retraction movements only for vehicles fitted with
scissor type stabilisers.
Switch 2 controls the movements for lifting and
lowering of the stabilisers for all models.
Press on the icons present on the switches to:
extend the stabilisers
retract the stabilisers
lift the stabilisers
lower the stabilisers
Control by means of the multi-function display
To operate the stabilisers by means of the multiple
function display, the stabilisers page must be
displayed.
The commands in the page are blocked by default for
safety reasons. To activate these, press unlock
button
1 .
Select the stabilisers to be moved by pressing the
corresponding buttons
2 . All four stabilisers can be
selected rapidly by pressing button 3 .
After selecting the stabilisers, use the joystick of the
pad to impart the movements:
-
X1 : move the joystick to the right to extend the
stabilisers;
- X2 : move the joystick to the left to retract the
stabilisers;
1
2
1
2
3 5
Y1
Y2
X1 X2
4