Magni RTH 4.18, Руководство по эксплуатации и обслуживанию

Страница: 35 / 127

SECTION ON PRODUCT INFORMATION 35
Quick-fit coupling for the equipment
The vehicle can be ordered with two types of quick-fit
coupling for the equipment.
Type “I” coupling
The type “I” , coupling, with Magni Telescopic Handlers
patent, is designed to be more rigid, more compact,
and easy to fit, in comparison with those of
competitors and is designed solely for equipment
designed and constructed by Magni Telescopic
Handlers with similar coupling.
“U” coupling
The “U” type coupling ensures greater compatibility
with different types of equipment: It can, in fact, be
fitted with equipment designed and constructed by
Magni Telescopic Handlers with similar coupling just
as it can also be fitted with equipment designed and
constructed by other manufacturers (e.g. Manitou
Costruzioni Industriali), after checking the conformity
and installation of suitable devices by Magni
Telescopic Handlers.
Shear pin housing
The housing of the shear pin for the quick-fit coupling
of the equipment is present in the front part of the
vehicle chassis.
The shear pin must also be present on the vehicle so
as to be available when required.
Always fit the shear pin in its housing when not in use.
If placed in an unsuitable part, the shear pin may get
jammed between the moving parts of the vehicle,
causing serious problems.
Anchoring points
The vehicle is provided with four anchoring points, in
the front part of the chassis and in the rear part, all
marked by a yellow sticker as shown above.
Unless otherwise indicated in this Manual, never fix
lifting or anchoring devices to other parts of the
vehicle.