Magni MM-410, Руководство оператора, Страница: 164 / 182

Command Codes (AVM-510A)
E-2
PC to AVM-510A (Data Sent)
This section describes the data sent from a PC to the AVM-510A. Note that these strings are requests
for data or control functions that affect the AVM-510A.
Request Functions
STATUS REQUEST ‘s’ <CR> Refer to “Control Functions” for results.
BIT IMAGE SIZE ‘r’ N<CR> Set raster image size
N = 1 (full size image)
N = 0 (¼ size image)
Example: r1<CR> causes the AVM-510A to select a ¼ size image.
SEND BIT IMAGE ‘q’ <CR> Causes the AVM-510A to send a raster
image.
Note: The raster image is compressed
according to the HP DeskJet method 2 TIFF
compression (refer to the HP DeskJet
Technical Reference Guide for details).
MEMORY STORE
FUNCTION ‘M’ N<CR> N is the memory number [1. .10] in which to
store the current state.
MEMORY RECALL
FUNCTION ‘m’ N<CR> N is the memory number [1. .10] to be
recalled.
V POS REQUEST ‘v’ <CR> Also see V POS SET
H POS REQUEST ‘h’ <CR> Also see H POS SET
VECTOR PHASE
REQUEST ‘p’ <CR> Also see VECTOR PHASE SET
VAR GAIN
REQUEST ‘g’ <CR> Also see VAR GAIN SET
SELECTED LINE
REQUEST ‘l’ <CR> Also see SELECTED LINE SET
MEASURE LINE
REQUEST ‘n’ <CR> Also see MEASURE LINE SET
SEND MEASURE
DATA ‘b’ <CR> ASCII string sent to PC
TIMECODE LINE
REQUEST ‘t’ x<CR> Also see TIMECODE LINE SET
INTENSITY
REQUEST ‘i’ <CR> Also see INTENSITY SET
PERSISTENCE
REQUEST ‘d’ <CR> Also see PERSISTENCE SET