Magnescale MG80-SC1, Руководство по эксплуатации, Страница: 44 / 51

43 / 48
Write/Read Description
SCN= / SCN=?
Command/Return format
Comparator group number
①②
SCN=
③
③
= 1 to 4 (group number)
REF= / REF=?
Command/Return format
Reference point setting
①②
REF=
③
③
= 0: Reference point function OFF
1: Reference point function ON
LCLR
Command/Return format
Clear the reference point setting (reference point offset value).
①②
LCLR
Note: Use the LCLR command only when the reference point usage setting is
ON.
STTERM= / STTERM=?
Command/Return format
Select the external start input function.
①
STTERM=
③
③
= 0: START function
1: HOLD (LATCH) function
RSSEP= / RSSEP=?
Command/Return format
Select the transfer data separator.
①
RSFORM=
③
③
= 0: Space
1: Newline (CR+LF)
RSFORM= / RSFORM=?
Command/Return format
Select the RS-232C output data format.
①
RSTRG=
③
③
= 0: Mode 1
1: Mode 2
2: Mode 3
RSTRG= / RSTRG=?
Command/Return format
Select the RS-232C trigger or internal timer.
①
RSTRG=
③
③
= 0: External trigger (low-speed mode) *Mechanical contact, etc.
1: External trigger (high-speed mode) *Transistor, etc.
2: Internal timer 0.2 s
3: Internal timer 0.5 s
4: Internal timer 1.0 s
5: Internal timer 5.0 s
6: Internal timer 10 s
7: Internal timer 30 s
8: Internal timer 60 s
9: Internal timer 300 s
SCALE= / SCALE=?
Command/Return format
Set the scale unit (mm or inch).
①
SCALE=
③
③
= 0: mm
1: mm/25.4
CLOSE
Command format
Close the parameter setup.
CLOSE
Close the parameter setup and store the setup data.