Magnescale MG10-P1, Инструкция по эксплуатации

Страница: 84 / 132

36
(E)
MG10-P1 / MG10-P2
I/O area
Input format
−
P1: source input (
+
COM)/
−
P2: sink input
(
−
COM)
Photocoupler-insulated, external power
supply DC 5 to 24 V
Output format
−
P1: open collector output, sink type (
−
COM)
−
P2: source type (
+
COM)
Photocoupler-insulated, external power
supply DC 5 to 24 V
Input signals Reset, start/latch, pause, RS trigger (valid
for all connected channels)
Output signals General alarms
Modules which can be connected (sold separately)
Counter module MG20-DK, MG20-DG, MG20-DT
Different models can be mixed and
connected together; max. 16 units
∗
1
I/F module MG30-B1, MG30-B2
∗
1
Other
Operating temperature 0 to
+
50
°
C(no condensation)
and humidity range
Storage temperature
−
10 to
+
60
°
C (20 to 90 % RH)
and humidity range
∗
1: The system cannot be configured in such a way that the total
power of the modules connected to the MG10 will exceed 54 W
when the supply voltage is 12 V or will exceed 108 W when it is
24 V.
Design and specifications are subject to change without notice.
8. Specifications
8-1. Electrical Specifications
Supply voltage DC 12 to 24 V (11 to 26.4 V)
Allowable power startup time: Max. 100 ms
Power consumption 2.0 W
+
total power of connected modules
∗
1
Communication area
Communication RS-232C (compliant with EIA-232C
interface standard)
Baud rate setting 2400, 9600, 19200, 38400 bps
Data length 7 or 8 bits
Stop bit 1 or 2 bits
Parity None, odd, even
Delimiter “ CR ”, “ CR ”
+
“ LF ”
Flow control Hardware flow control (RTS, CTS)
Link function
No. of units linked Max. 16 units (total of 64 counter modules)
Cable length Max. 10 meters
between links