EN - 61
FUNCTION SETUP
EN
Add Channels
This function lets you add the Channels that were not added by
“Auto Channel Preset” due to the reception conditions during
the initial setup.
2
Select “Add Channels” using
[
K
/
L
]
, then
press
[ OK ]
.
• The password will be required if you have locked
Channels. Refer to ‘Channel Lock’ on page 62.
• Channel search will begin.
3
Press
[ OK ]
on “Finish” to complete
Channel scan.
• Press
[ (EXIT) ]
to Exit.
Skip Channels
The Channels Selected here will be Skipped when Selecting the
Channels using
[ CH +/
−
]
.
Those Channels can still be Selected using
[ the Number
buttons ]
.
2
Select “Skip Channels” using
[
K
/
L
]
, then
press
[ OK ]
.
3
Select the Channel you would like to Skip
using
[
K
/
L
]
, then press
[ OK ]
.
• “Watch” that the Channel is not Skipped.
• “Skip” that the Channel is Skipped.
• To reactivate a Skipped Channel, use
[
K
/
L
]
then
press
[ OK ]
.
• Repeat step
2
until you Select all the Channels you
would like to Skip.
• Press
[ (EXIT) ]
to Exit.
Antenna Out
Set whether you want the Antenna signal to passthrough when
the Power is Off (Standby) mode.
2
Select “Antenna Out” using
[
K
/
L
]
, then
press
[ OK ]
.
3
Select a desired item using
[
K
/
L
]
, then
press
[ OK ]
.
Old
Off
This unit will passthrough the Antenna
signal when the Power is Off (Standby)
mode.
This unit does not passthrough the
Antenna signal in the Power Off
(Standby) mode.
• If you connect the RF to another device, recommend
to set it “Old”.
• If you Select “Old”, Power Consumption is high.
Attenuator
To decrease TV Broadcasting signal strength to the proper level.
2
Select “Attenutor” using
[
K
/
L
]
, then press
[ OK ]
.
3
Select a desired item using
[
K
/
L
]
, then
press
[ OK ]
.
Old
Off
TV Broadcasting signal strength to the
proper level.
Maintain the current TV Broadcasting
signal strength.
Continued on next page.
EN.indd 61
2015/09/02 19:01:08
