Magenta Mondo III Matrix, Инструкция по установке и настройке

Страница: 19 / 44

.
19
3. Installation (cont)
9. Apply power to the Mondo III Matrix system. It is recommended that power is applied simultaneously to all
switch frames. If this is not practical, then apply power to Slave switch frames first, then power up the
Master switch frame.
10. Mondo III is intended to be controlled via a third party application such as AMX or Crestron. Instructions on
control packages is beyond the scope of this document. For troubleshooting purposes, it is recommended to
use a simple terminal control program such as Hyperterminal. See Section 4 and 5 for set up and
commands.
NOTE
It is recommended to maintain cable lengths as equal as possible from each transmitter unit to the
switch. This is due to all adjustments for cable length compensation are done on receiver units.
Switching between inputs with unequal cable lengths may cause display images to change due to
incorrect cable compensation settings on the receiver. The Morph-It Cable EQ option can be used to
add/subtract cable lengths. Contact Magenta Research for details
17
Adding Inputs beyond 64
Figure 3-2: UTP Cabling Examples