Magenta Mondo III Matrix, Инструкция по установке и настройке

Страница: 14 / 44

14
MAGENTA MONDO MATRIX CHAPTER 2: Overview/Design Guidelines
2.2 Design Guidelines, cont.
Controlling the Mondo III Matrix
The Mondo III Matrix does not offer manual or front panel control options.
All commands are input via an RS232 serial port on the master frame via a third party control system such as
Calypso Control Systems, Crestron, or AMX.
A remote control panel, the Mondo TC touchscreen, is also available as a control option. Contact Magenta
Research for details.
Additionally a simple terminal program such as Hyperterminal (available as part of the Windows operating system)
may be used to send individual commands to the Mondo III.
The Mondo III features multiple serial ports for various control options depending upon the version:
Mondo III without the SAP option

Features two DB9 COM ports that can be used for additional control options (note that ports COM1
and COM2 are only supplied on the first Mondo frame).

The 7 pin phoenix connector labeled 1-7 may also be used as a control input COM port.
Mondo III with the SAP option

Features eight DB9 COM ports that can be used for additional control options or in SAP mode.

The 7 pin phoenix connector labeled 1-7 may also be used as a control input COM port.

A USB port can also be used with a PC serial terminal application.
Interframe serial cabling utilizes the BUS connector labeled A,B, GND. This is a high speed serial bus system that
has higher execution speeds. This bus is only compatible in Mondo III mode.
A 7 pin phoenix output connector labeled 8-14 is provided for backwards compatibility with older Mondo systems.
The Mondo III frame must be configured via the LCD to legacy mode for this connector to function.
See Appendix A for cabling and Section 4 for LCD configuration.
See Section 3 for cabling and connection diagrams.
12
Mondo III Interframe cabling (input)
Mondo III Control Input and/or
Legacy Mondo Interframe
Cabling (input) Legacy Mondo Interframe
Cabling (output)
Not used for Mondo III
Mondo III Interframe Bus Termination switch.
Mondo III Interframe cabling (output)
Mondo III Control
SAP version
only.
Requires software
driver on host PC
Contact Closure
Used in ALARM
mode. See
command section
Mondo III Control Input (COM1 &
COM2.
Non-SAP versions. First frame only
Mondo III Control Input (COM1
through COM8.
SAP versions. All frames.