Magenta Mondo III Matrix, Инструкция по установке и настройке

Страница: 12 / 44

12
MAGENTA MONDO MATRIX
2.2 Design Guidelines, cont.
Switching Individual Signals (Pairs) on a single input/output
It is possible to switch individual pairs of the Cat5 switch inputs and outputs to one or different locations.
This is useful when sending audio or serial signals from one source to locations that have different video sources.
For example, a different source of video may be displayed while a single audio or serial signal is broadcast to one or
more displays without changing the video signal. Reference the Batch Routing Command set in Section 5.
See the table below for a reference chart for the signals MultiView places on individual pairs.
Local Breakout of Signals
It is possible to breakout source input signals such as video, audio, or serial by utilizing the last input card cascade
loop outs to the appropriate Magenta receiver. Note that these signals do not pass through the switch.
10
Video Out
Audio/Serial Out