Magellan FAST Survey, Руководство по началу работы

Страница: 15 / 36

11
• Repeat the previous step for all your Z_Max receivers (see figure 7).
• Then enter the Receiver PIN for each of the detected devices. Click on the
receiver for which you want to enter the PIN. Click Set Receiver Pin and
enter the Receiver PIN. The factory-set default PIN value is 12345.
• If the PIN has been changed, you can read it from the Z-Max by sending the
$PASHQ,BTH command to the Z-Max receiver via a serial data cable. The
command can be sent from GNSS Studio's WinComm utility (refer to the
GNSS Studio Office Software User Manual for more information on this
utility).
• You may also change the receiver name in order to better recognize the
receiver you want to connect to.
• Click
Cancel
on the top of the Bluetooth Receivers window.
Figure 7- Z-Max List Window