12
13
LOCKS
IN THE
FRAME
LOCKS
IN THE
FRAME
Variant A
Termination cable
Variant B
Termination cable with acoustic module
Connect an INSTINCT system cable to the upper / last
INSTINCT Guard / Guard+. On the second port, a termination
cable must be connected.
Work steps in the door frame
5. Connection of INSTINCT Guard / Guard+ and INSTINCT termination cable
Work steps in the door frame
6. INSTINCT Guard / Guard+ assembly
!
PAY ATTENTION TO THE SYSTEM FOLDER
Recommendations for suitable screws can be
found in the profile-specific system folder.
!
ASSEMBLY NOTES
1. Make sure that the cables are not trapped or
damaged.
2. Make sure that the cables are not damaged
when screwing in the INSTINCT Guard /
Guard+ (for example, by too long screws).
3. Do not overtighten the screws to prevent the
INSTINCT Guard / Guard+ from twisting and to
avoid stiffness. This especially applies to the
fixing of the hooks – over-tightening may
impair proper function.
