14
15
7-10 mm
SW 7
LOCKS
IN THE
FRAME
LOCKS
IN THE
FRAME
Adjust the pin position according to the
specifications of the profile-specific system folder
to ensure proper rebate air compensation.
The assembly of the components is hereby
completed. On pages 29 and 38, the
commissioning with / without Test Kit continues.
Work steps in the door leaf
1. INSTINCT striker plate assembly
!
PAY ATTENTION TO THE SYSTEM FOLDER
Recommendations for suitable screws can
be found in the profile-specific system
folder.
!
ASSEMBLY NOTES
Do not overtighten the screws to avoid
twisting or deformation of the INSTINCT
striker plates.
Work steps in the door leaf
2. Basic adjustment of the locking pin
!
NOTE
The final adjustment of the striker plate
takes place only during commissioning, as
seen on pages 65 and 66.
