18
19
LOCKS
IN THE
SASH
LOCKS
IN THE
SASH
Check the milling and, if necessary, remove the burr
to avoid damaging the cables.
1. When using an INSTINCT Bluetooth module, it
must be placed and wired at the recommended
positions (see system folder) before the INSTINCT
Guard and Guard+ cabling.
Work steps in the door leaf
1. Milling checks
!
PAY ATTENTION TO THE SYSTEM FOLDER
For the positioning of the individual
components and the drilling and milling
patterns, the specifications of the
profile-specific system folder must be
observed.
Work steps in the door leaf
2. Bluetooth module assembly – optional
!
NOTES ON THE CONNECTION AND
DISCONNECTION OF PLUGS
Connect the plug to the socket until the
plug snaps into place.
By pressing the protruding tab and
pulling out the plug at the same time,
the connection is released again.
