34
35
COMMISSIONING
WITH TEST
KIT
COMMISSIONING
WITH TEST
KIT
Commissioning with Test Kit
Commissioning with Test Kit
10. Close the door and activate the day release to prepare the door for delivery. To do this, the
DAY
button
must be pressed for at least 2 seconds.
If pressed for less than 2 seconds, the day release is only activated for a single opening. If the door is not
opened for a period of 5 seconds, it is automatically locked again.
12. Disconnect the INSTINCT system cable (locks in the frame) or the INSTINCT cable transition (locks in the
sash) from the INSTINCT Test Kit.
11. Unplug the INSTINCT Test Kit from the power supply.
Control:
Output 2 lights up.
Control:
The day release must remain activated even after disconnecting the power supply.
!
NOTE ON
DAY RELEASE CONTROL
The door must remain closed and must
not pop open. If it does, the contact
pressure must be corrected.
If the locks do not lock when the door
is closed, the day release is successfully
activated.
13. Commissioning with the INSTINCT Test Kit is now successfully completed.
Tone
Time
medium
deep
!
CONTROL SIGNAL – DAY RELEASE
ACTIVATION
If an acoustic module
has been installed,
the following signal
is heard:
