![background image](http://html.mh-extra.com/html/macdon/m155/m155_operators-manual_685734118.webp)
OPERATOR’S STATION
1. Turn ignition key to RUN, or start the engine.
2. Press PROGRAM (A) and SELECT (C) on cab display
module (CDM) to enter Programming Mode.
• WINDROWER SETUP? is displayed on the
upper line.
• NO/YES is displayed on the lower line.
3. Press right (B) arrow to select YES. Press SELECT (C).
• SET KNIFE SPEED? is displayed on the upper line.
Figure 3.97: M155 CDM Programming Buttons
4. Press SELECT (C) until TILT CYL INSTALLED? is
displayed on the upper line.
• NO/YES is displayed on the lower line.
5. Press right (B) arrow to select YES. Press SELECT (C).
6. Press PROGRAM (A) to exit Programming Mode or
press SELECT (C) to proceed to next WINDROWER
SETUP action.
Figure 3.98: M155 Hydraulic Center-Link
Activating the Rotary Header Drive Hydraulics on an M155
NOTE:
This procedure requires installation of the optional Rotary Header Drive Hydraulics (MD #B5510). For more
information, refer to
7.1.17 Rotary Header Drive Hydraulics (13-foot), page 450
.
1. Turn ignition key to RUN, or start the engine.
2. Press PROGRAM (A) and SELECT (C) on cab display
module (CDM) to enter Programming Mode.
• WINDROWER SETUP? is displayed on the
upper line.
• NO/YES is displayed on the lower line.
3. Press right (B) arrow to select YES. Press SELECT (C).
• SET KNIFE SPEED? is displayed on the upper line.
Figure 3.99: CDM Programming Buttons
147649
102
Revision A
Содержание M155
