MacDon M155, Руководство оператора

Страница: 304 / 510

OPERATION
3. Press DISPLAY SELECTOR (E) on the ground speed lever (GSL) to display
DRAPER INDX
21
at (A) on the cab
display module (CDM).
4. Press DRAPER FAST (C) or SLOW (D) on the CDM until display (A) shows
##.## ##.# DRAP IND
with the
desired index value.
• The displayed value (##.##) = draper speed (mph or km/h
22
)
• The displayed value (##.#) = the index value
Examples:
• Windrower is operating at 8 mph with header index ON and set at 1.5.
Display shows:
9.5 1.5 DRAP INDX
where
9.5
(8 + 1.5) is the draper speed in mph and
1.5
is the
header index setting.
• Windrower speed drops to 7.5 mph at same header index setting.
Display shows:
9.0 1.5 DRAP INDX
where
9.0
(7.5 + 1.5) is the draper speed in mph and
1.5
is the
header index setting.
• Windrower is operating at 8 mph with header index ON and set at 0.9.
Display shows:
8.9 0.9 DRAP INDX
where
8.9
(8 + 0.9) is the draper speed in mph and
0.9
is the
header index setting.
Setting Draper Speed Independent of Ground Speed
Figure 4.289: Operator Console
Set the speed of the draper independent of ground speed as follows:
21. DRAPER INDX will only be displayed when operating at a ground speed faster than minimum draper speed plus
the header index value.
22. Depending on CDM programming.
147649
288
Revision A