![background image](http://html.mh-extra.com/html/macdon/m155/m155_operators-manual_685734157.webp)
OPERATOR’S STATION
1. Turn ignition key to RUN, or start the engine.
2. Press PROGRAM (A) and SELECT (C) on cab display
module (CDM) to enter Programming Mode.
• WINDROWER SETUP? is displayed on the
upper line.
Figure 3.184: M155 CDM Programming Buttons
3. Press SELECT (B) until DIAGNOSTIC MODE? is
displayed in upper line.
• NO/YES is displayed on the lower line.
4. Press right (A) arrow to select Yes. Press SELECT (B).
Figure 3.185: M155 Diagnostic Functions
5. Press SELECT (D) until ACTIVATE FUNCTIONS? is
displayed on the upper line.
• NO/YES is displayed on the lower line.
6. Press right (C) arrow to select YES. Press
SELECT (D).
CAUTION
Check to be sure all bystanders have cleared the area.
Figure 3.186: M155 Functions
147649
141
Revision A
Содержание M155
