MacDon M155, Руководство оператора

Страница: 315 / 510

OPERATION
Figure 4.300: Operator Console
a. Set the HEADER INDEX switch (B) to
ON
.
b. Press the DISPLAY SELECTOR button (E) on the GSL to display
##.## ##.# REEL IND
28
or press the
FAST (C) or SLOW (D) switch.
• The displayed value (##.##) = reel speed (mph or km/h or rpm
27
)
• The displayed value (##.#) = reel index value
c. Press FAST (C) or SLOW (D) until the desired reel index value is achieved.
NOTE:
The reel will continue operating at the minimum reel speed setting when ground speed drops below the set value.
The cab display module (CDM) display (A) will
fl ash ##.## MIN REEL (RPM or MPH or KPH
27
) prompting you
to change the minimum set-point or increase ground speed if the total of ground speed, plus the index value
is
LESS THAN
the minimum reel speed set-point.
Examples:
• Windrower is operating at 8 mph with HEADER INDEX ON, and set at -1.0.
Display shows:
7.0 -1.0 REEL IND
where
7.0
(8.0-1.0) is the reel speed in mph and
-1.0
is the header index setting.
• Windrower speed drops to 7.5 mph at same HEADER INDEX setting.
Display shows:
6.5 -1.0 REEL IND
where
6.5
(7.5-1.0) is the reel speed in mph and
-1.0
is the header index setting.
• Windrower is operating at 8 mph with HEADER INDEX ON, and set at 2.0.
Display shows:
10.0 2.0 REEL IND
where
10.0
(8+2.0) is the reel speed in mph and
2.0
is the header index setting.
28. REEL IND will only be displayed when operating at a ground speed faster than minimum reel speed plus header
index value.
147649
299
Revision A