MacDon Industries Ltd.
680 Moray Street, Winnipeg, Manitoba, Canada R3J 3S3
T. (204) 885-5590 f. (204) 895-9146 www.macdon.com
215037
12
Revision B
U&A, Dealer
– C Series
f.
Check auger clearance is between 1.0” and 1.25” (Figure 15).
i.
See Operator’s Manual for adjustment procedure.
g.
Check slack on auger drive chain/s
i.
Ensure there is between 0.5” and 0.75” of total deflection at mid-span (red arrow, Figure 14).
ii.
See Operator’s Manual for adjustment procedure.
h.
Check deck plate clearance with the deck plates set to their minimum gap (Figure 15).
i.
A – 3/4”
ii.
B – 15/16”
iii.
See Operator’s Manual for adjustment procedure.
i.
Check minimum snapping roll knife clearance (Figure 16).
Figure 14: Auger drive chain deflection
measurement (red arrow) and drive sprocket (red
circle)
Figure 15: Auger clearance (left) and deck plate clearance (A & B, right).
