MacDon Industries Ltd.
680 Moray Street, Winnipeg, Manitoba, Canada R3J 3S3
T. (204) 885-5590 f. (204) 895-9146 www.macdon.com
215037
7
Revision B
U&A, Dealer
– C Series
b.
Once header is tilted down to field position, remove header stand.
i.
Remove lifting bar after attaching header to combine (Section 6), raising header, and
engaging feederhouse cylinder props.
ii.
If applicable, remove Velcro strap securing bulkhead lines from header stand first (Figure 2).
4.
Moving Driveline Storage Bracket from Shipping to Field Position
a.
Driveline storage bracket/s must be moved down from the shipping to field position (Figure 3).
5.
Moving Header Clearance Lights from Shipping to Field Position
a.
Remove U-bolts securing clearance light, rotate light to field position (ensure yellow reflector faces
forward), and rotate and reinstall U-bolts (Figure 4).
6.
Attaching Header to Combine
a.
Adjusting latch hooks
i.
After picking up the header, position of latch plate may need to be adjusted in order to
engage the locking pins.
Figure 4: Clearance light secured by U-bolts (red circle, left) in shipping position (left) and field position (right).
Figure 3: Driveline storage bracket in shipping position (left) and field position (right).
