Mac Victor 2.0 Installation Operation Manual 042408.pdf - © 2008 Mac Victor Power, LLC.
Page 19 of 23
6.2 Input SPD Alarm / Output Fuse Indication
6.3 Circuit Breakers
If any of the circuit breakers trip, a red indicator appears behind the clear plastic window on each breaker.
To reset the breaker, switch to the “Off” position and then switch back to the “On” position. If a circuit breaker
continues to open, check for a circuit overload or a wiring fault. A qualified electrician may be required to safely
diagnose this problem.
Surge Monitor Operation:
Standard Monitor and Alarm
See Section 5.4 for complete operation and troubleshooting
Figure 6.4
Figure 6.5
Optional 5
th
Circuit Breaker and
integrated Isolated Ground
(IG) Receptacles
Standard Output Circuit
Breakers (quantity of 4)
Standard Input Circuit
Breakers (quantity of 1)
MV1
MV2
MV3
MV4
MV5
