USER MANUAL
PrestoAdvancedAD101_AD301_UG_000_UK
Descriptions and non-contractual illustrations in this document are given as an indication only.
M2M Design reserves the right to make any modification
56
Figure 34 – Connection Manager
Management - Simple Management Protocol (SNMP)
SNMP, or Simple Network Management Protocol, is a network protocol that provides network
administrators with the ability to monitor the status of the Router and receive notification of any critical
events as they occur on the network. The Router supports SNMP v1/v2c and all relevant Management
Information Base II (MIBII) groups. The appliance replies to SNMP Get commands for MIBII via any
interface and supports a custom MIB for generating trap messages.
Figure 35 - SNMP configuration page
SNMP Settings
Label
Description
Enable SNMP
SNMP is enabled by default. To disable the SNMP agent, click this option to
unmark.
Get Community
Create the name for a group or community of administrators who can view
SNMP data. The default is
public
. It supports up to 64 alphanumeric
characters.
Service Port
Sets the port on which SNMP data has been sent. The default is 161. You can
specify port by marking on user defined and specify port you want SNMP data
to be sent.
Service Access
Sets the interface enabled for SNMP traps. The default is Both.
Reload
Click
Reload
to discard any changes and reload previous settings.
Save
Click
Save
button to save your changes back to the PRESTO Advanced Router
and enable/disable SNMP.
Table 23 - SNMP parameters
