USER MANUAL
PrestoAdvancedAD101_AD301_UG_000_UK
Descriptions and non-contractual illustrations in this document are given as an indication only.
M2M Design reserves the right to make any modification
20
Enable network
locking
Option that allows a user to lock a SIM card for a desired operator by specifying
PLMN id of the operator. This option is very useful in border areas since you can
avoid roaming expenses.
Persistent connection
Keep connection alive, after Do not exit after a connection is terminated. Instead
try to reopen the connection
Reboot after failed
connections
Reboot after n consecutive failed connection attempts.
Enable SIM1/SIM2
keepalive
Make some traffic periodically in order to maintain connection active. You can
set keepalive interval value in minutes
Ping target
This field specifies the target IP address for periodical traffic generated using
ping in order to maintain the connection active.
Ping interval
This field specifies ping interval for keepalive option.
Advanced ping
interval
This field specifies the time interval of advanced ping proofing.
Advanced ping wait
for a response
This field specifies the timeout for advanced ping proofing.
Maximum number of
failed packets
This field specifies maximum number of failed packets in percent before
keepalive action is performed.
Keepalive action
This menu provides a choice between two possible keepalive actions in case
maximum number of failed packets is exceeded. If Switch SIM option is selected
router will try to establish the connection using the other SIM card after the
maximum number of failed packets is exceeded. If Current SIM option is selected
router will only restart the PPP connection.
Connection type
Specifies the type of connection router will try to establish. There are three
available options: only GSM, only UMTS and AUTO. For example, if you select
Only GSM option, router will not try to connect to UMTS, instead router will
automatically try to connect to GSM. By selecting AUTO option, router will first
try to establish UMTS connection and if it fails, router will go for GSM
connection.
Mobile status
Displays data related to mobile connection. (current WAN address, uptime,
connection status…)
Reload
Click
Reload
to discard any changes and reload previous settings.
Save
Click
Save
to save your changes back to the PRESTO Advanced Router.
Switch SIM
Click Switch SIM try to establish the connection using the other SIM card.
Refresh
Click
Refresh
to see updated mobile network status.
Connect/
Disconnect
Click
Connect/Disconnect
to connect or disconnect from mobile network.
Table 5 - WAN parameters
Figure 10
shows screenshot of GSM/UMTS tab
configuration menu. GSM/UMTS
menu
is divided into two
parts.
Upper part provides all parameters for configuration GSM/UMTS connection. These parameters
can be obtained from Mobile Operator. Please use exact parameters given from Mobile Operator.
Bottom part is used for monitoring status of GSM/UMTS connection (create/maintain/destroy
GSM/UMTS connection). Status line show real-time status: connected/disconnected.
