Application Note #480
17
Technical Support — 800.523.9466
Low-End Trim Shortcut Outside of Programming Mode
(Entry into Advanced Programming Mode is not required)
For quick changes to the Low-End Trim, a shortcut method has been created that bypasses the APM.
1.
Press and hold the Tap
button and the
Lower
button until an Indicator Light (IL) blinks. The Load will turn OFF and
then turn ON to Low-End.
2. Adjust light output using
Raise
/
Lower
button until stable and not flickering.
Press and release the
Tap
button to save setting.
3.
Press and release
Tap
button to turn load OFF, then press
Raise
button once. If load does not turn
ON or remains unstable repeat and in
Step 2
increase light with
Raise
button.
T
L
&
Or
L
R
T
R
T