![background image](http://html1.mh-extra.com/html/fab-fours/f2950/f2950_installation-instructions-manual_3099901001.webp)
Installation Instructions
Dodge 1500 Premium Front Bumper
Product Number: F2950, F2951, F2952
Application: 2013-2018 Dodge 1500
Copyright 2008 Fab Fours, Inc.
Page 1 of 21
F295X_REV_A
SAFETY
Your safety and the safety of others is very important.
▪
In order to help you make informed decisions about safety, we have provided
installation instructions and other information.
▪
These instructions alert you to potential injury hazards.
▪
Please do a job safety analysis before each task to identify potential hazards for your
situation and remove/protect against them.
▪
You must use your own good judgment.
▪
Read and understand all safety precautions and instructions before installing this
product.
THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR
INSTALLATION AND USE RESTS WITH THE OWNER.
CARELESS INSTALLATION AND OPERATION CAN RESULT IN SERIOUS INJURY
OR EQUIPMENT DAMAGE.
SENSORS FIELD OF VIEW WILL BE ALTERED WITH USE OF THE
REPLACEMENT BUMPER.
Injury hazard
Failure to observe these instructions could lead to severe injury or death.
❑
❑
Always remove jewelry and wear eye protection.
❑
❑
Always use extreme caution when jacking up a vehicle for work. Set emergency brake
and use tire blocks. Locate and use the vehicle manufacturers designated lifting points.
Use jack stands.
❑
❑
Always use appropriate and adequate care in lifting components into place.
❑
❑
Always ensure components will remain secure during installation and operation.
❑
❑
Always wear safety glasses when installing this kit. A drilling operation will cause
flying metal chips. Flying chips can cause serious eye injury.
❑
❑
Always use extreme caution when drilling on a vehicle. Thoroughly inspect the area to
be drilled (on both sides of material) prior to drilling, and relocate any objects that may
be damaged.
❑
❑
Always use extreme caution when cutting and trimming during fitting.
❑
❑
Always tighten all nuts and bolts securely per installation instructions.
❑
❑
Always route electrical cables carefully. Avoid moving parts, components that become
hot and rough or sharp edges.
❑
❑
Always insulate and protect all exposed wiring and electrical terminals.
❑
❑
Always perform regular inspections and maintenance on mounts and related hardware.