Application Note #480
16
www.lutron.com
Programming Option 7: High-End Trim
What Does It Do:
Some lamps require a lower High-End Trim than others. This feature allows the user to determine the maximum light level
and adjust the settings accordingly.
SETTINGS
High-End Trim allows the ability to change the highest achievable light levels.
Note:
Default setting is IL7.
DIRECTIONS
Setting High-End Trim
1. While in Advanced Programming Mode (APM),
Press the
Raise / Lower
button to select the seventh option,
Programming Option 7: High-End Trim.
Once Indicator Light
(IL7) is blinking, Press the Tap
button. The IL will
then switch to the current setting and begin to
blink rapidly,
indicating that the Programming Option has been entered.
2. Upon entering the High-End Trim programming option by
Pressing the Tap
and observing the IL changing to a
fast
blink
,
Press the Raise / Lower
buttons to select the desired High-End Trim level.
Note:
While setting the High-End Trim, it is advised that the programmer observes the actual light (load) and not the
Indicator Lights on the dimmer to determine what is the optimum setting. Incremental levels of light intensity
exist between each Indicator Light setting, and the programmer may have to press the Raise / Lower button
several times before the next IL will illuminate.
3. To save the desired High-End Trim setting,
Press the Tap
button. This will exit out of the High-End Trim option and
return to APM main menu.
Or
R
L
IL7: Highest
High-End
IL1: Lowest
High-End
Note:
• In some applications using LED and CFL bulbs, it may be necessary to lower the High-End Trim to achieve an
optimum dim range.
• If there is no button activity for 1 minute, the dimmer will automatically exit APM and return to Normal Operation.
• To save and exit immediately out of APM to Normal Operation, Press and Hold the Tap button until Indicator
Lights stop blinking.