Ludlum Measurements 3003, Руководство пользователя

Страница: 86 / 89

Model 3003 and 3003i Multi-Detector Survey Meter / SCA
Appendix A
Ludlum Measurements, Inc. Page A-4 September 2020
Settings
The settings for AuxComm are only configurable through software. See Figure A-5.
Figure A-5: Example – Lumic 2.0 Calibration Software
AuxComm Setting - Mode
The mode setting for AuxComm configures how the port will function. Table A-1 lists the
modes and their baud rates.
Table A-1: AuxComm Mode
Mode Baud Rate
SLURM 115200
LMI Direct 115200
375 Standard 2400
375 Ethernet 2400
375 for 272D 2400
Raw Count 115200
SLURM: Used to encapsulate “LMI Direct” messages with encryption and checksums. This
mode is primarily used for Bluetooth®.
LMI Direct: Full exposure to the “LMI Comm” Communication protocol. This allows
reading and writing all parameters, data streaming, etc.
375 Standard: Legacy support for Model 375 Standard output. This is compatible with the
Model 375 Logger software and some versions of the Model 3276 Ethernet Kit (LMI#
4498-958).