Ludlum Measurements 3003, Руководство пользователя

Страница: 57 / 89

Model 3003 and 3003i Multi-Detector Survey Meter / SCA
Section 4
Ludlum Measurements, Inc. Page 4-27 September 2020
Unit 1 - DOSE Alarm 3 - Upon entry into Unit 1 Dose Alarm 3, one of the
following parameters will be selected (flashing).

Rightmost Digit (0-9)

Middle Digit (0-9)

Leftmost digit (0-9)

Multiplier with all digits flashing (adjustable from x.xx µ to xxx M
depending on unit selected)
Use the LOG button to select the appropriate parameter and use the PRG and
ACK/RST buttons to scroll through the parameter options.
Unit 1 - Channel - Upon entry into Unit 1 Channel, the parameter will be
selected (flashing) indicating the state of the parameter. Valid parameter options
are as follows:

1 (Channel 1)

2 (Channel 2)

1i (Internal Detector)

1 2 (Channel 1 + Channel 2)

1-2 (Channel 1 - Channel 2)

2-1 (Channel 2 - Channel 1)
Use the PRG and ACK/RST buttons to scroll through the parameter options.
Page 8 - Unit 2
To begin adjusting a unit parameter, short press the PRG or ACK/RST to scroll
through the available unit parameters. When the appropriate parameter is
selected, short press DETECTOR to select the detector that needs the
parameter adjusted. To begin, short press LOG to begin modifying the
parameter chosen. Finally, extra-long pressing the LOG button will complete
the modification.
Unit 2 - RATE/MAX Units and Minimum Display - Upon entry into Unit
2 RATE/MAX Units and Minimum Display, one of the following parameters
will be selected (flashing). Note: Select Unit first before setting other
parameters.

Rightmost Digit (0-9)

Middle Digit (0-9)

Leftmost digit (0-9)